RETRACTION


Retraction Notice





Article Information


Identifiers and Pagination:

Year: 2016
Volume: 10
First Page: 205
Last Page: 205
Publisher Id: TOMEJ-10-205
DOI: 10.2174/1874155X01610010205

Article History:

Electronic publication date: 30/12/2016
Collection year: 2016


open-access license: This is an open access article licensed under the terms of the (https://creativecommons.org/licenses/by/4.0/legalcode), which permits unrestricted, noncommercial use, distribution and reproduction in any medium, provided the work is properly cited.



RETRACTION

The Publisher and Editor have retracted these articles [1-13] in accordance with good ethical practices. After thorough investigations we believe that the peer review process was compromised.

REFERENCE

[1] Xi X. The Design and Application of Mechanical Automation Technology in Food Factory Network Management System Based on Fractional Algorithm. Open Mech Eng J 2015; 9: 1092-6.
[2] Shao F, Wang Y, Xiao Y, Xiao L, Zhang K. PCBN Tool Wear for Hard Materials Based on Thermodynamics Principals. Open Mech Eng J 2015; 9: 1103-8.
[3] Bin J, Guisheng Y, Shuai Z, Tong X. Multi Tooth Uneven Cutting Behavior of High-speed Milling Cutter and Criterion for Milled Surface Topography. Open Mech Eng J 2015; 9: 395-401.
[4] Xian-Hai Y, Lu M, Qian L, Lu-Peng S, Chun-Xiang S. Research on Design Reuse System of Parallel Indexing Cam Mechanism Based on Knowledge. Open Mech Eng J 2015; 9: 40-6.
[5] Bin J, Minghui Z, Tong X, Wei Z. Process Design Method of High Speed and Stable Cutting Hardened Steel. Open Mech Eng J 2015; 9: 428-36.
[6] Zhenxing R, Chunyan L, Yulong L. Lubrication Performance Improvements on Two Side-Surfaces of Crescent Board in Internal Involute Gear Pump. Open Mech Eng J 2015; 9: 443-8.
[7] Sun P, Gao J, Xing Z, Zhang Y. Influence Analysis on Heat Effect of Size Parameter for Mold Heat System of Large-Scale Wind Turbine Blade. Open Mech Eng J 2015; 9: 71-6.
[8] Li J. CFD Simulation of the Air Flow Field in the Multi Blade Centrifugal Fan. Open Mech Eng J 2015; 9: 769-72.
[9] Liu S. Foundry and Development of Ductile Iron Crankshaft. Open Mech Eng J 2015; 9: 791-6.
[10] Lian T, Pei D. Study on Rub-Impact Dynamical Behavior of An Asymmetrical Rotor-Bearing with Variable Ratio of Stiffness. Open Mech Eng J 2015; 9: 80-5.
[11] Zhan H-W, Xu F, Lu L-F. Researches on the Observation on the Jetting of Liquid of High Viscosity and Droplet Control. Open Mech Eng J 2015; 9: 812-9.
[12] Gao Y, Han J, Liu L. Research on the Tooth-Surface Controlling and Honing Machining of the Ultral-Precision CBN Gear. Open Mech Eng J 2015; 9: 831-6.
[13] Zhu J, He L. Modified DWT for Feature Extraction of Bear Failure Vibration Signal. Open Mech Eng J 2015; 9: 973-6.

Related Article