Numerical Simulation of Middle Thick Plate in the U-Shaped Bending Spring Back and the Change of Thickness
Jianhua Ren*, 1, Xiaogang Guo2
Identifiers and Pagination:Year: 2014
First Page: 648
Last Page: 654
Publisher Id: TOMEJ-8-648
Article History:Received Date: 16/09/2014
Revision Received Date: 23/12/2014
Acceptance Date: 31/12/2014
Electronic publication date: 31/12/2014
Collection year: 2014
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: (https://creativecommons.org/licenses/by/4.0/legalcode). This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
In this paper, the typical U-shaped pieces were taken as the object of study and the finite element numerical simulation software Dynaform is applied to simulate the effect of sheet metal bending. The U-shaped bending spring back and its thickness change are analyzed. The influence law of main parameters of die structure to sheet thickness change and the spring back amount are obtained by combining with the orthogonal analysis method. Finally a set of the optimal parameter combination is found, the spring back of U-shaped piece and the change of the thickness are controlled in a reasonable range.